Product description:

Use scope:

Double-effect falling film evaporator, suitable for food, pharmaceutical, chemical, biological, environmental protection, waste liquid recycling etc for evaporation and concentration, low temperature continuous has high heat transfer efficiency, shorter time for heating the material such as the main characteristics, so especially suitable for heat-sensitive, foam and other materials.

Equipment:

Evaporator, condenser, separator, hot pressing pump, vacuum pump, slurry pump, condensate pump and operation platform, electrical instrumentation and valve door, piping system.

Product features:

1. the steam heating uniformity, has the characteristics of high heat transfer efficiency of heating time is short.

2. can make use of waste heat as heat source, reduce the steam consumption.

3. material distribution, uniform distribution in each evaporator heating tube, material under the action of gravity and vacuum induction and air flow, flow into membrane from top to bottom, in the process of movement with the heating tube outer wall heating steam heat and evaporation.

4. evaporation process in vacuum environment, evaporation temperature is relatively low, the evaporator is not easy to scale.

5. suitable for evaporation and concentration, foam materials due to the material liquid into membrane evaporation in the heating tube, which form the gas-liquid separation, in effect at the bottom of the body at the same time, most of the material liquid is siphoned off, only a little part of material liquid and all secondary steam into the separator separation, the whole process of material liquid forming no too big impact, to avoid the formation of bubbles.

6. for evaporation and concentration, juice or milk equipment can have sterilization function at the same time, the material after preheating first, and then into the sterilizer, maintain 30 to 60 seconds, in effect, the material quickly flash, temperature in an instant.

7. the equipment can be equipped with CIP cleaning system, the realization of in-place cleaning, a complete set of equipment is easy to operate, no dead Angle.

8. can match the steam jet pump, reduce the steam consumption, save operating cost. 9: equipment in and out of the material.

10. equipment automatic control system can be configured, complete with the configuration, operation, monitoring and control functions, system including communication interface, display alarm, print statements, control parts, such as feed rate of the automatic control, the heating temperature automatic control, automatic control discharge concentration, cleaning automatic control.