A Vacuum To Take Off The Angry Machine

Vacuum takes off angry machine is the use of vacuum suction effect rule out material liquid contained no non-condensable gas device.

An overview of the

A vacuum to take off the angry machine

A dairy, juice and other material is on the line degassing essential equipment.

The vacuum takes off angry machine is used to remove the air (oxygen) in the material liquid, inhibiting Browning, pigment, vitamin, aroma components and other material oxidation, prevent quality; Can remove the material liquid suspended powder particles in the gas, inhibition of particles floating, maintain good appearance; Prevent bubbles when canning and high-temperature sterilization sterilization; To reduce the corrosion of the inner wall of the container, have the effect of corrosion.

Technical characteristics

1. can greatly shorten the heating or cooling system after the first injection, exhaust time, is advantageous to the system's first trial run.

2. the gas removal system, prevent the gas resistance, ensure the normal operation of the system during the stable and reliable.

3. remove the pump cavitation, the noise of the system is running.

4. by removing the oxygen in the water, will reduce the oxygen corrosion, prolong the life time of the equipment.

5. as a result of the removal of the water gas, heat exchanger with gas bubble on the surface, improve the heating efficiency.

6. take off the angry machine working time and cycle can be adjusted according to need.

7. a single application system capacity up to 150 m3; Can be used more in parallel.

8. equipment installation, convenient and full automatic operation, safe and reliable, easy to maintenance.

Using the step

Use, as long as open the matching of the vacuum pump according to the operating instructions of the pump (pump), smoke detector in the air, at the same time within the materials will be fed from the inlet self-priming device, when the material to a certain position, control valve automatic control of material, at this time can observe and control the feeding speed from sight hole, when the degree of vacuum in condenser meet the process requirements, can be exported from material extraction material, as long as you maintain the balance of the vacuum degree and front-rear, can continue to produce.

Power generation equipment structure of feed system in order to prevent corrosion, and thus eliminate water mixture of non-condensable gas, carbon dioxide, nitrogen, air, etc And can heat the water and open heat exchangers together to maintain the pump suction head.

Matters needing attention

1. before each use should open the lid or sodium hydroxide solution with hot water to wash in.

2. when used to keep the sealing parts is good, can not have leakage phenomenon.

3. often should check the diaphragm pressure gauges, maintain its accurate.