Flash Degassing Evaporator

Brief introduction:

Flash degassing evaporator are all made of stainless steel materials, inside outside the polishing processing, mounted on a stainless steel rack.

The tank is a cylindrical container, at the bottom and the bottom shell have a cooling jacket. On the end cover of flange connection on the container.

The tank is equipped with endoscopic, valve products, purge valve, air cock, one-way valve, thermometer and built-in cleaning nozzle.

Material by the tangent to a way into the container after the spiral flow down along the wall.

Flash degassing evaporator also includes a stainless steel tube condenser to condensation from the secondary steam to take off the tank,enrichment, improve milk solids,have got the high quality products.

The condenser is equipped with pressure gauge, spring vacuum relief valve, water pipe thread connection, air and cooling water discharge pump connection.

Automatic control of total solid content, improve the dry matter content more than 1.5%.

Automatic control export flow, liquid level, temperature.

Flash degassing evaporator is equipped with:

Take off between tank and condenser, tanks and discharging pump internal connection between the stainless steel pipe.

From to take off the tank discharging with product discharge pump, centrifugal pump, with water cooling double seal.

With the water seal of the vacuum pump, discharge from the condenser cooling water and air. Vacuum pump outside the paint with a cast iron pump cavity, brass and stainless steel impeller axis. With the motor, the vacuum degree is about 65%, the corresponding temperature is 78 ℃.